Go Back   The Hunter's Life > GUNS & AMMO > RELOADING
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next

Range Report October 1, 2015
  #1  
Old 10-01-2015, 11:49 PM
gitano's Avatar
gitano gitano is offline
Administrator
 
Join Date: Oct 2004
Location: Wasilla, Alaska
Age: 68
Posts: 18,940
gitano is on a distinguished road
Default Range Report October 1, 2015

It was a good day at the range.

We've had bad weather essentially for the past two weeks. Yesterday, Wednesday, Sept. 30, and today Oct. 1, were the only clear days in the past 2 weeks and this evening it was supposed to turn bad again. (It has.) Yesterday, Wed., the range is closed, so today was "it" if I was going to go in good weather.

Those of you watching my range sessions of late will recall that they haven't been beacons of shining light. Lots of troubles with my personally made firearms: The Steyr .358, the AR-10 I am building chambered in 8mm-08, and the Riedl in .17 Remington. (See here for details: http://thehunterslife.com/forums/showthread.php?t=18621) LOTS of mechanical problems with those rifles.

I had some "things" I needed to finalize/clean up:
1) Determine what was wrong with the Riedl,
2) Get the AR-10 WORKING, and
3) Shoot the Anschutz Model 54 target rifle.

In addition, I wanted to:
1) Try a new load for the .17 Remington given to me by j0e_bl0ggs: 23.5 grains of Vihtavouri N-133 behind a 20-grain bullet,
2) Make sure my .338 Win mag was still shooting as straight as it always has, and
3) Shoot the .17 Predator some more at 100 yd.

I took the following rifles:
1) Reidl (.17 Remington),
2) AR-10 (8mm-08),
3) Predator (.17 Predator),
4) Model 700 Remington (.17 Remington), I brought this along in case the Riedl continued to be a 'non-performer',
5) Anschutz Model 54 (.22 RF), and
6) Ruger Model 77 (.338 Win Mag).

I started with the Anschutz. I hadn't shot this rifle yet and just wanted to get some bullets down the bore mostly. Also, I wanted to see how the 'scope j0e_bl0ggs gave me was going to work. I didn't bring any special ammo. I just grabbed a box that had a variety of manufacturers AND some of my "reformed" .22 RFs. (See here for that exercise: http://thehunterslife.com/forums/sho...ight=Reloading.) The reformed ones weren't Aguila SSSs, but had had their bullets reformed and "uniformed" in diameter. Here are the targets at 35 yd:

Those are ALL .22 RF holes. The big ones are from the "reformed" bullets. The squares with the light lines are 1/2 inch. The dark-lined squares are 1".

This group is just a hodge-podge of manufacturers and bullet types, so I wasn't expecting much. It was pleasant to shoot the rifle. I think I'll let j0e_bl0ggs explain about the 'scope.

The second group:

Was Remington "He-Velocity" hollow points. It's better, but I think this rifle should be up to better than this at 35 yd. I was done with the Anschutz when these groups were shot.

The next rifle to shoot was the AR-10. It's been giving me fits with respect to function. I spent the past month or so putting on a new barrel and getting the function to the point of reliability. I had 10 rounds; 5 with 150-grain Hornady's, and 5 with 125-grain HPs. Really all I wanted to do was have it put them all 'on paper' at 100 yd. I shot one 125 at 35 yd to see where I was hitting relative to where I was aiming. That done, I moved the target out to 100 yd. (Actually, I shot all the rifles at 35 yd first, then moved to 100 yd, but I want to present all of the AR-10 data at once.) Here are the four 125-grain bullets at 100 yd:

Yup, that's four shots. I know it's almost three inches wide, but the wide one was the first shot out of a cold barrel. The other three are pretty darn close for 100 yd and the first 5 shots out of a rifle - half an inch vertical and about three quarters horizontal. I'll take it for 125-grain 8mm bullets! (The point of aim was the small bull about 6" below the group.)

This target is the five 150-grain bullets (the big holes ):

Just over an inch vertical and half an inch horizontal. These were the second five shots from a new barrel in a "hand-made" rifle chambered without a reamer specific to the cartridge. (7.62x51 NATO + 8mm-06 for neck + 8mm throater), and no effort made with respect to "load" - just not "hot". Again, the point of aim was ~6" below.

The next rifle was the Reidl at 35 yd. Here's the group:

The point of aim was the black bullseye with "sighter" printed in the center. Not great for 35 yd, but more importantly, the scope had ALL of the vertical adjustment used up. That's "sad", but actually not TOO bad of news. It means that the original scope is "OK" (at least in the elevation). The problem is the base. I guess that the original owner had a special base with LOTS of elevation built in so that he could shoot long distance targets. The bad news of course is that I need to get another base. I chose not to shoot the Riedl at 100 yd.

Setting the Riedl aside, I took up my FAVORITE .17, the one on a Model 700 Remington in chambered in .17 Remington. This rifle has consistently shot 1" groups at 100 yd since the day I bought it. My original loads used H414 powder. That powder is VERY "dirty", leaving LOTS of schmutz in the barrel. Especially in a tiny barrel. j0e_bl0ggs worked up a load for his .17 Rem using VV N-133 that has worked very well for him, and suggested I try it. That's what I did. I only shot one cartridge at 35 yd because I only needed to see that the rifle was still "on target". Here is the 100 yd 3-shot group. I only shot three shots because it was clearly shooting "straight", and I didn't see any reason to waste ammo.

The single you see in the bull below the 3-shot group is the 'sighter' shot at 35.

Next came the Predator. First was getting "on paper" at 35, then the 5-shot 100 yd group:

Not "stellar", but I'll take it. I can fine-tune the I4227 load.

Finally, the .338 Win Mag. I have taken a great deal of game with this rifle, and therefore I LIKE it. The first shot at 35 to make sure it was on paper was a bit 'shocking'. I haven't shot this rifle in maybe a decade. And then, when at the range, I always used a "Lead Sled". Today I was only using a front rest. Also, I had been shooting all the other 'sissy' cartridges. I didn't have a good hold on the .338 for the first shot, and it 'kicked' me! For the 100 yd shots, I decide to take them off-hand. This rifle is capable of sub-MoA precision, but I'm not. Still, I'm "fine" with this off-hand at 100


I have spared you the "stats", and while I took the MagnetoSpeed chronograph, I decided not to bother with it. Next time.

Paul
__________________
Then you will know the truth, and the truth will set you free. John 8:32

"We make men without chests and expect of them virtue and enterprise. We laugh at honor and are shocked to find traitors in our midst. We castrate and bid the geldings be fruitful." ~ C.S. Lewis.

Do not confuse technical skill for wisdom and do not confuse strength for skill. Paul Skvorc
Reply With Quote
 

Tags
.17 predator, .17 rem, .22 rf, .338 wm, 8mm-08, anschutz 54, ar-10, boyds stock, range report, remington model 700, riedl, ruger model 77, thumbhole


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Orchard harvest 2015 branxhunter THE CAMPFIRE 20 08-04-2016 11:57 PM
Spring 2015 Nosler deals Jamie.270 RELOADING 2 03-22-2015 05:39 PM
range report wby 30-378 buffalo bob RELOADING 8 03-03-2011 05:47 PM
Range Report on .375 x .284 Win gitano RELOADING 18 08-30-2009 05:26 PM
October Harvest bowhunter 51 BOWHUNTING 14 12-16-2008 12:42 AM



All times are GMT -5. The time now is 03:23 AM.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.